rear shelf 65 Gt350 question

As far as I know, there are no part numbers. I was told the only sure fire way to tell is the fact that these pieces were made by hand laminating the fiberglass into the mold. Chopper guns were not used so back side and underneath looks like large sheets of fiberglass cloth applied in a criss-cross pattern.
Hope that helps
Bill

 

I don't think you will find an original one for $300 unless the seller doesn’t know what he has (wouldn’t be the first time!). I stopped trying to figure out the logic of EBay bidding a long time ago. I attempted to answer your original question with what I have been told. Years ago, a noted Shelby restorer showed me the difference between hand laid up glass shelves and later repo units constructed using a chopper gun.

 

Your trying to figure out why people bid what they do on EB^^??

Guess your going to be going to college for a while

 

I think he's wanting to know which is better, reproduction in plastic or reproduction in fibergalss.

Quality may be different in other areas besides material... I have never worked with either of them but hopefully someone on here has fitted both types and can tell you the fit quality.

How they take paint may be a consideration too.

 

Keep us posted on what you end up with.

 

Hi,
I think you are talking about the Shelby 66 shelf on ebay
and not a 65 unit.
/Texas Swede

 

I have been told by several reputable sources that the aformentioned Ebay part is a correct original vintage part for a 66 Shelby. 65's were different (fiberglass). By the price paid (over $4700), I'm sure the new owner and a few others knew this as well. So the education continues for all of us.