Oil gauge and tacho on a 65 GT350

Hi,
You just cut a hole in the middle above the radio cutout
through the foam and the metal below. The hole through the
the metal on my original 65 looks like it was made by a drunk
with a chisel. However, it worked. Make sure you don't make the hole through the dash foam and metal behind too large.
You also need a hole through the firewall for the oil line.
I have seen that hole in many places on different 65's.
My car has it at the left side in the air cond. cutout.
Also, place a grommet in the hole before ptting the line through it.
Good luck,
Texas Swede

 

Also remember to hook all the gauge stuff (wires and tubes), the gauges themselves, the wire for the instrument lights (everything) in the "pod" then slide the wires and oil pressure line through the hole you hack in the dash. Do all of your connection completions under the hood ..(bonnet). It is impossible to do anything after the pod is attached to the dash,
good luck,
jimbo