Join Shelby Forums Today

R Model rear window

Discussion in '1965-1970 Shelby Mustang GT350 & GT500' started by Jerry_Moss, Apr 4, 2008.

  1. Apr 4, 2008 #1
    Jerry_Moss

    Jerry_Moss Well-Known Member

    Age:
    49
    Posts:
    264
    Likes Received:
    0
    Joined:
    Jul 12, 2005
    Location:
    Germany/Bavaria
    Hi guys

    A few weeks ago we talked about the plastic rear window of the R Models.
    But are there any detailed pictures out there of an original without
    the weather strippings?
    How thick are the 4 alloy pieces that hold the window down??
    How does it look without the window installed? I mean something must
    be set in there to raise the window up to get it flush with the outer surface
    of the vehicle.Is this piece welded in???

    Please let me know if you know something.
    Bye Jerry
    :thumbsup:
     
    Jerry_Moss, Apr 4, 2008
    Jerry_Moss, Apr 4, 2008
    #1
  2. Apr 5, 2008 #2
    9inchrear

    9inchrear Member

    Posts:
    6
    Likes Received:
    0
    Joined:
    Jul 6, 2006
    A square section, aly bar (bent to fit in the aperture) sits in the recess and the plexi screws onto this. On my car the aly was seated on a thin bead of sealer and a thin strip of waterproof rubber was sandwiched between the plexi and aly bar - necessary to prevent trapped water/ingress.
     
    9inchrear, Apr 5, 2008
    9inchrear, Apr 5, 2008
    #2
  3. Apr 5, 2008 #3
    Jerry_Moss

    Jerry_Moss Well-Known Member

    Age:
    49
    Posts:
    264
    Likes Received:
    0
    Joined:
    Jul 12, 2005
    Location:
    Germany/Bavaria
    Your window is screwed on the car?
    What i heard and saw till now looked more to me that the
    window just lays in place and is kept there by 4 square
    alloy plates wich are riveted on the car.

    Have you any pictures of your window?

    Thanks Jerry
     
    Jerry_Moss, Apr 5, 2008
    Jerry_Moss, Apr 5, 2008
    #3
  4. Apr 5, 2008 #4
    9inchrear

    9inchrear Member

    Posts:
    6
    Likes Received:
    0
    Joined:
    Jul 6, 2006
    The method you describe would be fine if you didnt have to contend with rain!
    To ensure a good seal to the rubber membrane, countersunk nylon screws hold the window to the aly. The edge of the plexi was blacked, so in effect the screws cant be seen. Sorry no detail photos: the car is tucked up elswhere at the moment.
     
    9inchrear, Apr 5, 2008
    9inchrear, Apr 5, 2008
    #4

Share This Page