Interesting Jim, never thought of this being a 6 cyl cap. According to Bob Mannel's excellent SBF book the elbow nipple is correct for closed emission non-HiPo V8s in 65 and 66, but doesn't go into much detail for 67. I guess that could make the early GT350 and closed emission HiPo caps a chromed version of the 6 cyl. closed emission cap with this particular one being a 67 unit because of the block FoMoCo stamp? Thanks, Dave In a message dated 6/29/2005 8:50:38 PM Pacific Daylight Time, ecj@peoplepc.com writes: > Being that its a block FOMOCO logo my guess is that it is for a 1967 6 Cyl. > closed crank case ventilation system. For 1967 I think the nipple sticks out > straight on the 6 Cyl engines and for the V8's its an elbow nipple that > sticks up. > > Jim Seisser > > -----Forwarded Message----- > From: DMGT350@aol.com > Sent: Jun 28, 2005 10:31 PM > To: ecj@peoplepc.com > Subject: Re: Oil Breather Cap Application? > > Sorry Jim, I embedded the pic instead of making it an attachment, sometimes > that doesn't work. Here it is. Thanks, Dave > > In a message dated 6/28/2005 5:10:50 PM Pacific Daylight Time, > ecj@peoplepc.com writes: > > >> No picture. >> >> -----Original Message----- >> From: Dave McDonald <dmgt350@aol.com> >> Sent: Jun 28, 2005 6:27 PM >> To: ShelbyMustang@carmemories.com >> Subject: Oil Breather Cap Application? >> >> Does anyone know the specific application for this oil breather cap? >> This is an original cap (not a repop) which as you can see has the block >> FoMoCo stamp and was originally black. I just cleaned it up and >> repainted it. It's a push-on type. I know it's for the closed emission >> cars but would like to know what year(s), model(s), engine(s), etc. >> >> Thanks, >> Dave >>
