Separate names with a comma.
A CS fuel pressure gauge was not used on the vintage cars . Some of the continuation Cobras that Shelby builds today sometimes use them. That...
Re: 1967 upper lower scoops should be sealed with what? No clamps on the brake ductin The tape I suggested takes most of the concern away. This is...
Re: 1967 upper lower scoops should be sealed with what? No clamps on the brake ductin In this case RTV=Clear silicone sealer on the scoops . I...
The hole in the headlight buckets modified by SA are typically 1.50 . The zip ties used on the amp gauge harness were used on some of the...
The consensus of opinion is that the chrome housing indicated a service /warranty replacement tach. The 66 tachs had a high failure rate early on....
]Dan, you must not have buckets that had the Shelby hole modification like came from the factory. The hole you describe sounds like the size in a...
I have a pair of the special gray wire clips but the rubber grommets are next to impossible to find . I have only seen the rubber grommets in...
Not that I have ever heard of . The 65 and 66 tachs are completely different . They do not interchange. FYI the 66 tach had a higher failure rate...
The black regular Mustang 4 speed shift knob is the correct factory knob for a 67 Shelby. You are probably thinking of the white Hurst shifter...
Many times referred to as parchment . You will have to have the interior paint mixed for the best match to the door panels and upholstery. The...
So then are you saying that the powersteering pump color was the only detail that you could have possibly forgotten about during your 45 years of...
My point being I suspect the same is true for the unpainted master cap that is typically painted. PO (past owner) adjusted for exactly the same...
Paper gaskets only was factory. Spacers/insulators are commonly added by P/O for the purpose of insulating the carb from heat as much as possible....
No A/C and no smog would be a duel alt pulley and belts. Many 67 GT50's have had the waterpump ,crank and P/S pulley's changed . In this case the...
Interesting that speaking of painting that the shade of the poweresteering pump in the pre restoration differs to the restored version. Two types...
Under the coil bracket attaching bolt.
Ansen on the GT350 closed valve covers.
Ansen .
+1 .Those described discrepancies raise a big red flag when referring to a legit 66 GT350.
I hope you are able to reunite the lit with 5S193 with that said the 35K you have told others you want for the paperwork is more then I want to...
Long time forum member interested in the literature for 5S291 . Do you have a price in mind or are you considering offers? You can PM me or use...
If you read the content of this old thread you will understand that boxs should clear if original . Many of the reproduction enclosures fit...
Thread last active in July 2011? Now Feb 2014? Better late then never on a rebuttal I guess.
fuel pump gasket is white ,intake gasket is black ,oil fill tube is semigloss black. no overspray on outer aprons in the front inner fender side...
I am just a little curious after viewing your picture that if you are concerned about such a small hardly noticeable original detail around the...
