Separate names with a comma.
Re: 66 popularity I think that the image of the 66s was hurt by all the Hertz cars that were produced. Back in the 70s and 80s the Hertz cars...
I'm in the same boat as 66KGT. I've owned my 67 GT350 for 20 years and I have talked to the previous two owners and they confirmed that th engine...
IMO a nice driver Shelby that has lead a fairly unmolested life (not cut in half, no missing VIN numbers, 90% of its original unibody) with no...
Unfortunately the cleaner you used probably had some kind of caustic chemical in it and it actually etched (ate away at) the wheels. I'll bet...
My car (#2206) has black tape wrapped around the ammeter wiring. A word of caution: if you hook up the ammeter you need to be aware that you...
I recently got through cleaning the original floor pan on my 67 GT350 (#2206). I used old towels and a LOT of Krud Kutter. Anyway the original...
At a car show here in Houston a couple of years ago I ran into a guy who is the original owner of a 69 GT500 fastback. It was his second one...
Based on what I have seen my driver quality 67 GT350 has probably lost about 20% in value in the last year. A year ago any drivable, shiny 67...
If you want a clone - buy the nicest one you can find. DON'T try to build your own. Some of the Shelby specific pieces are VERY expensive plus...
GT350, #2206 with inboards has the "Z" stamping. Was delivered to and sold in Albequeque NM. Don't know the exact date but the engine is date...
I had Pony Carbs rebuild a 715 cfm Holley for the original 289 in my 67 GT350. The engine had had the heads ported and a pretty large (10" vacuum...
You CAN install the engine/tranny as a single unit. The factory did it that way. In order to do so you must do two things: get the REAR of...
Re: 65 gt350 R what size axles? If you are building a clone and you are worried about resale value then you should put in 31 spline axles and...
I did not have this problem. I have a set of Dart heads with roller rockers (poly locks) and the original valve covers with only a single gasket...
Just got my latest Autoweek. In it there is an article about the new Shelby GT-H (Hertz). Seems that at first there were only going to be 500...
Stant makes a fan clutch that will work on a 68.5 Cobra Jet. Part #FC511.
Check for a bad motor or tranny mount. The torque can cause the motor/tranny to move around and cause a binding condition. Also could be a...
If you want metal I can't help you. However, if you are willing to settle for a fiberglass version you should get in touch with Leon Grice at...
It started raining just as I was looking at the Silver Jade convertible. Took some pictures of it but did not notice anything in particular....
I was at the "Keels and Wheels" car show/auction in Houston this weekend. Some dealer from Oklahoma had brought several Shelbys to the auction....
