Separate names with a comma.
I think that is a good idea, it is not that hard to do and may shed light on the problem. Thanks for the tip, Ron
Good idea but the tires have about 20 miles on them. I checked the air pressure and all are at 30 psi which seem about right, but not sure.
I should have noted that I just put on a brand new set of Michelin Radials. From what I could gather the lower control arm needs to be pulled...
I have rebuilt the front end, new Koni shocks, springs, A frames, and installed poly bushings. On the rear end I put in new Koni shocks, poly...
Installed the Cobra master cylinder and it works good. The hardest part was putting on the new push rod (the cotter pin is very hard to get in)....
Thanks for the replies, I plan on adjusting them tomorrow. The previous owner told me that they seem to stay in adjustment and he had not checked...
According to my Ford Shop Manual the valve lash should be 0.022 cold and 0.018 hot, my question: Would the adjustment be the same with roller...
I too bought the pre bent lines and the adjustable push rod to adjust the travel of the brake pedal. Ron
I ordered one yesterday, should arrive towards the end of next week. The timing of this post was perfect for when I bled my brakes the master...
I was very careful to keep it at the same level so it should be okay. I should know pretty quick if I screwed up.
Okay, the oil pan is finally installed. After looking for and buying several oil pickup tubes (none of them worked) I finally just bent mine and...
It is hitting on the oil pickup tube filter (round part that has the screen in it) towards the back of the engine. The oil pan is basically...
Cobra Oil Pan Installation Question I talked to Branda today, he said that the oil pick up tube could have been changed when the engine was...
Re: Cobra Oil Pan Installation Question I looked in the catalog and even called Branda and was told that the pan used the standard oil pick...
I am in the process of installing a Cobra T style oil pan and have ran into a problem that I hope someone here can help me with. I removed the...
I am getting the idea that you are right, I also take it that repairing the cowl is a major job.
I am finding the same thing, you have to check the parts over very carefully for defects. I think I will be buying from another vendor from now...
I took the oil pan down to the auto parts and it is a straight thread (1/2"-20) so the information from John's Mustang was incorrect. I also...
I agree, the guy where I bought it said I needed a plug with internal hex and it would be flush to the bottom of the pan, no gasket, no head on...
A part number would be great. I bought the Cobra oil pan yesterday from John's Mustang here in Houston, strange thing was he did not have a...
Both replies good information and ideas, I will try and get some assistance this weekend and let you know what I find out. Thanks, Ron
I got caught in a rainstorm this afternoon and had some water coming in under the dash board. I thought the problem might be the cowl leaking but...
