Early 67 Shelby's also had the FOMOCO stamped shocks . This was a transition time and I have seen several examples were the Fomoco was on the back and autolite in the front . That is the way it was on 67-0001. Bob G. On Thursday, March 3, 2005, at 07:41 PM, Stephen G. Becker wrote: > correct - autolite stamping > > I have the front, just need the rear > > Thanks > > > ----- Original Message ----- From: <speegle@pipeline.com> > To: "Stephen G. Becker" <sbeckerone@charter.net>; > <Shelbymustang@carmemories.com> > Sent: Wednesday, March 02, 2005 8:29 PM > Subject: Re: wanted > > >> ..... Mustang or Shelby adjustable type? >> >> Since its late 66 I guess this is for a 67 model and if for a Shelby >> you would be looking for the Autolite stamping rather than the FoMoCo >> stamped Gabriel >> >> Just clarifying >> >> Jeff S >> >> -----Original Message----- >> From: "Stephen G. Becker" <sbeckerone@charter.net> >> Sent: Mar 3, 2005 12:06 PM >> To: Shelbymustang@carmemories.com >> Subject: wanted >> >> I need a pair of rear LATE 1966 dated Autolite shocks >> >> I just need the two (2) rear's >> >> New or used >> >> Thanks >> >> SGB >> >> >> >> >
ok well, either way then just need a set for the rear thanks ----- Original Message ----- From: "Robert Gaines" <bgaines@kc.rr.com> To: "Stephen G. Becker" <sbeckerone@charter.net> Cc: <speegle@pipeline.com>; <Shelbymustang@carmemories.com> Sent: Wednesday, March 02, 2005 9:03 PM Subject: Re: wanted > Early 67 Shelby's also had the FOMOCO stamped shocks . This was a > transition time and I have seen several examples were the Fomoco was on > the back and autolite in the front . That is the way it was on 67-0001. > Bob G. > On Thursday, March 3, 2005, at 07:41 PM, Stephen G. Becker wrote: > >> correct - autolite stamping >> >> I have the front, just need the rear >> >> Thanks >> >> >> ----- Original Message ----- From: <speegle@pipeline.com> >> To: "Stephen G. Becker" <sbeckerone@charter.net>; >> <Shelbymustang@carmemories.com> >> Sent: Wednesday, March 02, 2005 8:29 PM >> Subject: Re: wanted >> >> >>> ..... Mustang or Shelby adjustable type? >>> >>> Since its late 66 I guess this is for a 67 model and if for a Shelby >>> you would be looking for the Autolite stamping rather than the FoMoCo >>> stamped Gabriel >>> >>> Just clarifying >>> >>> Jeff S >>> >>> -----Original Message----- >>> From: "Stephen G. Becker" <sbeckerone@charter.net> >>> Sent: Mar 3, 2005 12:06 PM >>> To: Shelbymustang@carmemories.com >>> Subject: wanted >>> >>> I need a pair of rear LATE 1966 dated Autolite shocks >>> >>> I just need the two (2) rear's >>> >>> New or used >>> >>> Thanks >>> >>> SGB >>> >>> >>> >>> >> > >
Steve/Bob -Along these lines can you guys or anybody for that matter identify the aplication of Autolite C9ZF-18080 D1's rear shocks and Autolite C9ZX-18045 A fronts? Thanks DaveK ----- Original Message ----- From: "Stephen G. Becker" <sbeckerone@charter.net> To: "Robert Gaines" <bgaines@kc.rr.com> Cc: <speegle@pipeline.com>; <Shelbymustang@carmemories.com> Sent: Thursday, March 03, 2005 6:08 PM Subject: Re: wanted > ok > > well, either way then > > just need a set for the rear > > thanks > > > ----- Original Message ----- > From: "Robert Gaines" <bgaines@kc.rr.com> > To: "Stephen G. Becker" <sbeckerone@charter.net> > Cc: <speegle@pipeline.com>; <Shelbymustang@carmemories.com> > Sent: Wednesday, March 02, 2005 9:03 PM > Subject: Re: wanted > > >> Early 67 Shelby's also had the FOMOCO stamped shocks . This was a >> transition time and I have seen several examples were the Fomoco was on >> the back and autolite in the front . That is the way it was on 67-0001. >> Bob G. >> On Thursday, March 3, 2005, at 07:41 PM, Stephen G. Becker wrote: >> >>> correct - autolite stamping >>> >>> I have the front, just need the rear >>> >>> Thanks >>> >>> >>> ----- Original Message ----- From: <speegle@pipeline.com> >>> To: "Stephen G. Becker" <sbeckerone@charter.net>; >>> <Shelbymustang@carmemories.com> >>> Sent: Wednesday, March 02, 2005 8:29 PM >>> Subject: Re: wanted >>> >>> >>>> ..... Mustang or Shelby adjustable type? >>>> >>>> Since its late 66 I guess this is for a 67 model and if for a Shelby >>>> you would be looking for the Autolite stamping rather than the FoMoCo >>>> stamped Gabriel >>>> >>>> Just clarifying >>>> >>>> Jeff S >>>> >>>> -----Original Message----- >>>> From: "Stephen G. Becker" <sbeckerone@charter.net> >>>> Sent: Mar 3, 2005 12:06 PM >>>> To: Shelbymustang@carmemories.com >>>> Subject: wanted >>>> >>>> I need a pair of rear LATE 1966 dated Autolite shocks >>>> >>>> I just need the two (2) rear's >>>> >>>> New or used >>>> >>>> Thanks >>>> >>>> SGB >>>> >>>> >>>> >>>> >>> >>
